As a public service announcement, they're also printed below:
Burda sizes 36, 38, 40, 42, 44
Back length about 98 cm (39 ins)Materials: 150 cm (59 in) wide stretch jersey: 2.50 – 2.55 – 2.55 – 2.60 – 2.60 m (2 3⁄4 – 2 7⁄8 – 2 7⁄8 – 2 7⁄8 – 2 7⁄8 yds).
Vilene/Pellon G 785.
Stretch lace trim with one scalloped edge, 1 cm (3⁄8 in) wide: 1.90 – 1.95 – 2.00 – 2.00 – 2.05 m (2 1⁄8 – 2 1⁄4 – 2 1⁄4 – 2 1⁄4 – 2 1⁄4 yds).
A twin machine needle.
Recommended fabrics: Jersey or fine knits.
Preparation: Trace pattern pieces from pattern sheet. Follow lines and details for style 127 B. Glue pattern pieces 1 and 1a and 2 and 2a together at joining lines. Lengthen piece 1 as indicated. Trace the facing from piece 1 as a separate pattern piece. Trace pocket piece from piece 1 as a separate pattern piece – it is the same for all sizes. The loop marking on piece 2 is for size 36. Draw in the marking for the other sizes. Seam and hem allowances:Seams and edges 1.5 cm (5⁄8 in), hem 3 cm (1 1⁄4 ins). Cutting out:1 front with collar and sleeve x2 front facing with collar x2 pocket piece x42 back with sleeve x2a) tie belt, 126 – 130 – 134 – 138 – 142 cm (49 3⁄4 – 51 1⁄4 – 52 3⁄4 – 54 1⁄2 – 56 ins) long, 9 cm (3 1⁄2 ins) wide, finished width 4.5 cm (1 3⁄4 ins), b) 2 belt carriers, a total of 14 cm (5 1⁄2 ins) long, 4 cm (1 5⁄8 ins) wide (incl. allowance), c) 2 sleeve bands, 30.5 – 31 – 31.5 – 32 – 32.5 cm (12 – 12 1⁄4 – 12 1⁄2 – 12 3⁄4 – 12 7⁄8 ins) long, 5.5 cm (2 1⁄4 ins) wide.
Interfacing: See pattern layout.
Construction: Sew as described for style 127 A, but working pockets in side seams and sewing sleeve bands to sleeves. – Stitch side seams and underneath sleeve seams as continous seams, leaving pocket openings between markings. See style 120 for inseam pockets. – Stitch ends of sleeve bands together. Stitch sleeve bands to lower edges of sleeves, right side facing wrong side. Lay sleeve bands down and stitch to seam allowances, close to joining seam. Turn sleeve bands up on outside of sleeves, turn in at abutting line, and pin. Baste trim to sleeve, over upper edge of band, turning in ends at underneath sleeve seam. Edgestitch trim in place, catching the band.
3 comments:
Thanks Karen, I intend making this with that wool jersey, rayon jersey double cloth I got at Metro Textile on PR day, so I appreciate the translation.
Someone at Burda is asleep at the wheel. There have been a few errors like that recently on the website. Hopefully, they will catch them in the future.
you rock :) I might just have to make that robe now...
Post a Comment