And one thing that I've needed for some time, and haven't made an adequate version of is, of all things, a black skirt. A longer (though not too long) skirt, full (but not too full). Early last year I made the Ottobre 10 gore skirt, which was fine, but the fabric wasn't as good as it should have been and the seams started showing wear entirely too soon. To the thrift store it went.
I also had a black A-line skirt (my TNT Burda pattern) but though it was longer than my usual take on that pattern, I wanted something below the knee, that I could wear with boots without that gap showing in between.
patternreview, back in the mists of time.
BWOF 4/06 #122, skirt with back pleats. I used some of my apparently abundant collection of black rayon poly lycra (RPL), which I keep buying in the mistaken idea that I don't have any in stash. This is some serious skirt, people. The back pattern piece measures 44" before pleating, and the front is about 20". Which gives you some significant swish behind, and almost feels like I'm wearing a train. Very cool. The front is much more serious, just a slight flare to it, and the skirt drops from a front and back yoke, the back one curved to accommodate the curved line of pleats. Side zip. Loud lining of black and white floral poly charmeuse.
|Original BWOF photo|
Even adding 2.5" in length to the existing pattern, I found that if I hemmed the skirt properly, it wouldn't be long enough. And can I tell you, I also didn't feel like hand-hemming a skirt that had a hem of more than 5 feet in circumference?
My solution, otherwise known as a design opportunity, was to press the hem up by about an inch and use one of my machine's ornamental stitches to cover the raw edge. Then I added more rows of ornamental stitching on either side. All in all, the hem is about 1.5" high, and adds a nice bit of weight and interest to the skirt. And it used up almost 2 bobbins, so you know just how much sewing was involved, though it was the kind where I could just sit back and make sure it fed into the machine evenly.
I love it. I don't think I'm going to feel the need to replace this one any time soon, unless I wear it out.
but - can we see it? It sounds lovely. g
I really like your "design opportunity" - very cool, even if it did eat up a lot of thread.
Karen - what a great hem idea! I might be stealing that soon!
Love your hem treatment! It's beautiful.
I'd love to see your skirt modeled! The hem treatment is beautiful, and I just love a fun lining.
Did you use an embroidery machine or a standard sm on the hem?
I really like the idea of using different stitches on the hem. Yours looks great - like it has been embroidered! I'm not sure if it's my screen, but the thread looks slightly lighter than the fabric, which makes it look awesome and store bought! Great idea!
Wow! That hem treatment is so cool. I may try that on a pair of wool pants.
Love that skirt pattern! I didn't subscribe to Burda in 2006 and am having an impossible time finding a copy so I can make up that skirt (love me some butt-swishiness). Any suggestions?
What a fabuloso hem! Now I wish my machine actually had some decorative stitches!
That stitching is even more beautiful in person. Karen, there is a PR thread on use of decorative stitches. Hope you will offer yours to the lot. Wonderful idea.
Love the hem! What a great idea. It took me a minute to realize that the first photo was of the hem. As someone else mentioned, it looks embroidered. Great job.
Post a Comment